GLECO SINK TRAP 64OZ

Gleco traps offer an easy, clean, cost-effective solution to clay and glaze materials going down the drain. The Gleco Trap fits easily to most existing metal or plastic plumbing, and meets uniform plumbing code requirements in every municipality in the US and Canada. As you clean tools or the container, clay and other heavy sediments settle into the catch jar, while water overflows the jar and continues down the drain. When the catch jar fills up, just unscrew it and put on another one. It’s that easy to avoid expensive clogged drains — and it’s a must for environmentally conscious artists. The Gleco Trap comes with all the necessary parts.

When choosing what size to buy for your Gleco Trap, the only limitation is the space available under your sink. The plumbing under your sink is where you need to look: you’ll almost always find a pipe down from your sink going into a U-shaped joint called the P Trap. After the P Trap, an elbow joint turns the pipe so it runs horizontally into the wall.

Measure the space between the floor and the center of the horizontal pipe right after the P trap. That measurement tells you how much space is available for the Gleco Trap. The 11″ tall High Volume (HV) 3.5 gallon bucket needs an extra 6″ from the top of bucket to center of wall drain outlet for proper clearance.

NOTE: If you work with plaster or other substances that harden in water, like some glaze materials, it is necessary that you dispose of the bottle when you change it instead of emptying it to reuse.

Bottle Ounces: 64oz
Minimum Space: 15.5″
Best Space: 17″